User's Manual

DOT400 User Guide -

Servers tab, make sure Use Server-assigned IP address is

selected, and select OK. If you are unable to make

connection with these default settings, obtain the detailed

information from your ISP or network administrator

9. Tap Next and type in the country/region code, area code,

and telephone number.

10. Tap the Finish button.

The connection you just created appears as an icon in the

Network and Dial-up Connections folder.

If you are using an external modem, select Hayes Compatible on

COM1. When connecting to a network using an external modem,

you need to use the modem cable or adapter supplied by the

modem manufacturer.

1. Check if the modem card works with Windows CE.NET from its

manufacturer.

2. When using an external modem, check if it is compatible with

the Hayes commands.

To create a direct connection to a desktop PC, follow these steps:

1. Select Start > Settings > Network.

2. Double-tap the Make New Connection icon.

3. Select Direct Connection.

4. Tap Next.

5. Select a device you want to connect in the device window.

Since DOT 400 supports the connection via USB by default,

it’s not necessary to make this connection. Select “Infra

Port” or “Serial Cable on SP3” depending on the

connection method to the desktop PC.

6. Select Configure to proceed with settings.

7. Tap Finish.

This connection is used in the “PC Connection” method of the

Control Panel.

Creating a dial-up network connection

1. Select Start > Settings > Network, and double-tap the

new connection created by the instruction above..