User's Manual

DOT400 User Guide - 162 -
Data/File Backup
Since DOT 400 may need to be hardware
reset due to an unexpected problem, be
sure to back up the data/files in the
desktop PC, CF memory card, or flash
ROM.
To back up the data/files in the desktop
PC, connect DOT 400 to the PC. For details
about how to connect, refer to 4.
Connecting to Your Desktop PC. Use the
Copy/Paste menu of the Explorer of the
ActiveSync or Windows Explorer of the
desktop PC to make copies of DOT 400
data/files in the backup folder (created by
the user) of the desktop PC.
Insert the CF memory card in the CF type
expanded card slot. Tap Start > Programs
> Windows Explorer, and then tap Storage
Folder. Tap New Folder from the File Menu,
and create a backup folder. Then, copy the
data/files in DOT 400 and paste them in
the backup folder of the CF memory card.
Data/File
Ba
ck
up
The data/files can be copied to the flash
ROM of DOT 400. In this case, it is
recommended that only essential PIMs
data and notification data should be
copied. Since the flash ROM contains the
programs of DOT 400, its memory capacity
available is limited. Use Start > Programs
> PIMS > PIMS Backup, or run Windows
Explorer. Tap PIMS Backup to display the
files to be backed up in the upper window.
Select the desired data file and select Flash
Disk Storage. Then, tap Backup menu to
complete the backup. To restore the files,
select Storage to display the files to be
restored in the bottom window. Select the
desired data file and tap the Restore menu
to restore the PIMs data of DOT 400.