User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 7: Upgrading the firmware
90 TruVision DVR 10 User Manual
2. Select the USB upgrade mode.
Connect a USB flash memory to the TVR 10 and confirm that the firmware file is in
the root directory. Click USB to start the upgrade.
Note: The firmware must be downloaded to the USB main directory and the file
named “digicap.”
3. When finished, right-click or press ESC to return to the main menu.
4. Reboot the TVR 10.
Upgrading through the Web browser
You can log in to the TVR 10 Web browser to perform a firmware upgrade. Prior to
upgrade, ensure that you have the digicap.DAV file in the workstation you are
accessing the TVR 10 from.
To upgrade the firmware through the Web browser:
1. Log in to the TVR 10 Web browser.
2. Select the Configure button.
3. Select the Others tab.
You will need to scroll right through several tabs to locate the Others tab.
4. Click Remote Upgrading.
5. Click Explore and locate the digicap.DAV file in your workstation.
6. Click Upgrade. You will receive a prompt asking you to reboot the TVR 10.
7. Click Reboot to reboot the TVR 10.