User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 6: Utilities settings
TruVision DVR 10 User Manual 87
Searching for logs
You can also search for recorded logs by the following:
Options. There are four log options: All, Category and Time, Time, and Category.
Main information types. There are four main information types: All, Alarm,
Notification, and Operation.
Sub information types. There are several different types of sub information
depending on the main type selected. See Table 23 below for more information.
Date and time. Logs can be search by date as well as start and end recording times.
Table 23: Sub information type by main type
Main information type Sub information type by main information type
All All
Alarm External Alarm In, External Alarm Out, Motion Detect Start, Motion Detect
Stop, View Tamper Start, and View Tamper Stop
Notification Video Signal Loss, Illegal Access, Hard Disk Error, Hard Disk Full, IP Conflict,
and DCD Lost
Operation Power On, Shut Down, Abnormal Shut, Panel Login, Panel Logout, Panel
Config, Panel File Play, Panel Time Play, Local Start Record, Local Stop
Record, Panel PTZ, Panel Preview, Panel Set Time, Local Upgrade, Net Login,
Net Logout, Net Start Record, Net Stop Record, Net Start Transparent
Channel, Net Stop Transparent Channel, Net Get Parameter, Net Config, Net
get Status, Net Alert On, Net Alert Off, Net Reboot, BiComStart (Start Voice
Talk), BiComStop (Stop Voice Talk), Net Upgrade, Net File Play, Net Time Play,
Net PTZ
To search logs by type:
1. Display the View Log screen.
2. Select one of the four search criteria in the Search By list box: All, Category and
Time, Time, and Category.
If the All or Time criteria is selected, the main and sub type options are not
available.
3. Select one of the types listed in the Main Type list box.
4. Select one of the types listed in the Sub Type list box.
5. Click Search Log to start your search.
6. If you want further information on the logs, click More Info .
7. Click Return to the return to the main menu.