User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 6: Utilities settings
84 TruVision DVR 10 User Manual
3. The default unit name is “TruVision Recorder.” Click the Unit Name edit box to
enter into edit mode.
4. Enter the new unit name.
See “
Using an edit box” on page 22 for more information on entering text.
5. Click the edit box to exit the edit mode.
6. Click Confirm to save your changes.
Restoring to factory defaults
Use the Factory Defaults Restore button on the Utilities screen to restore the TVR 10
to its factory settings. Click Confirm at the prompt to confirm your changes, as shown
in Figure 32 below, and the system will automatically reboot.
Figure 32: Restore parameters