User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 5: Advanced setup
TruVision DVR 10 User Manual 81
Use the Shadow Tour Setup screen to define shadow tours. To display the Shadow
Tour screen, click Shadow Tour Setup
Note: The instructions below do not cover all PTZs.
To define a shadow tour:
1. Click Shadow Tour Setup on the PTZ screen to display the Shadow Tour Setup
screen.
2. Click Rec to display the PTZ control interface.
3. Use the directional arrow buttons to control the PTZ camera movement.
4. Click anywhere in the screen to save the operation track and return to the
Shadow Tour Setup screen.
5. Click Start to view the PTZ movement track. Click Stop to stop the preview.
6. Click Return to return to the PTZ screen.
7. Click Confirm on the PTZ screen to save your changes.