User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 5: Advanced setup
TruVision DVR 10 User Manual 79
5. Use the IRIS±, FOCUS±, and ZOOM± buttons to adjust the iris, focus, and zoom.
6. When finished adjusting, click Save to save that preset number.
7. Repeat steps 2 to 6 for additional presets.
8. Click Return to return to the PTZ screen.
9. Click Confirm on the PTZ screen to save all changes.
To delete a PTZ preset position:
1. Select a preset number on the Preset Setup screen.
2. Click Delete.
3. Repeat steps 1 to 2 for additional presets you want to delete.
4. Click Return to return to the PTZ screen.
5. Click Confirm on the PTZ screen to save all changes.
Preset tour setup
Each preset tour is made up of several preset points. A preset point includes:
• A preset position.
• A dwell time. This is the time duration when the PTZ camera stays at the preset
position.
• A dwell speed. This is the speed at which the PTZ moves to the preset position.
You can save up to 16 preset tour sequences. Make sure your PTZ supports the preset
tour function before you configure your preset tours.
Note: The TVR 10 does not support preset tours for GE domes.
To display the Preset Tour Setup screen, click Preset Tour Setup on the PTZ screen.
The Preset Tour Setup screen displays as shown in
Figure 31 on page 80.
Note: The instructions below do not cover all PTZs.