User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 5: Advanced setup
TruVision DVR 10 User Manual 77
Option Description
PTZ type Specifies the PTZ protocols. See Appendix D “PTZ protocols” on page
101 for a list of PTZ types.
Note: If you select the Pelco-P protocol, define the PTZ address plus or
minus 1 the Camera ID. For example, if the camera ID is 2, the TVR 10
PTZ address should be set as 3.
Preset setup Displays the Preset Setup screen.
Preset tour setup Displays the Preset Tour Setup screen.
Shadow tour setup Displays the Shadow Tour Setup screen.
PTZ types
For a list of support PTZ types, see
Appendix D “PTZ protocols” on page 101.
Configuring the PTZ protocols for GE Security cameras
Before the PTZ cameras are assembled in their housings, set their protocol and
address DIP switches for the TVR 10. for the different GE Security’s PTZ camera
configurations. See Table 22 below for different GE Security PTZ camera settings.
If you are using PTZ cameras from another company, please refer to their
configuration instructions.
Table 22: Configuring GE Security PTZ cameras
Camera Switch setting
TruVision Dome
16 PTZ
Protocol switches 1011
Address switches 0000
Baud rate 0000
Protocol switches
Cyberdome Protocol switches Auto
Address
switches
Baud
switches