User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 5: Advanced setup
74 TruVision DVR 10 User Manual
PPPoE setup
Use the PPPoE Setup screen (shown in Figure 28 below) to define settings for the
PPPoE function.
Figure 28: PPPoE setup
To use the PPPoE function:
1. Click Advanced Settings on the Network screen to display the Network Advanced
Settings screen.
2. Select an NIC type. Press Confirm to save and return to the Network screen.
3. Enter a port number.
In the Port edit box, use numeric keys to enter the port number. The port number
must be higher than 2000.
4. Enter the IP Server address.
Display the Advanced Settings screen. Enter a fixed Internet IP address where the
IP analyst software (IP Server) is run in the IP Server edit option.
5. Display the PPPoE Setup screen and enter the PPPoE settings.
To display the PPPoE Setup screen, click PPPoE Setup on the Network screen. This
enables PPPoE function. Enter the PPPoE username, password and verify
password that ISP provided.
6. Save your settings.
Click Confirm to save your settings and return to the Network screen. Click
Confirm on the Network screen to return to the main menu. The TVR 10 prompts
you to reboot to implement your network changes. In the reboot process, the TVR
10 starts the dialup using the PPPoE function. If the TVR 10 dialup Internet