User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 5: Advanced setup
72 TruVision DVR 10 User Manual
• Subnet mask
• Gateway IP
• Network communication port
• HTTP port
• PPPoE (Point-to-Point Protocol over Ethernet)
• DDNS (Dynamic Domain Name System)
Note: When a network parameter is modified, the TVR 10 will prompt you to save and
reboot the unit.
To display the Network screen, click Network. The Network screen displays as shown
in Figure 27 below.
Figure 27: Network setup
Network settings
Table 19 below describes the Network screen options.
Table 19: Network screen options
Option Description
IP address Specifies the network’s IP address. The IP address configured here must not
conflict with another IP address. If there is a DHCP server within the network,
you can set the IP as “0.0.0.0” then save and reboot the TVR 10. In the reboot
process, the TVR 10 searches the DHCP server and retrieves one dynamic IP
address. This value displays as the dynamic IP address. If the TVR 10 is utilizing
the PPPoE function, the TVR 10 also connects to the Internet and this value
displays as the dynamic internet IP address. Default value is 192.168.111.111.