User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 5: Advanced setup
TruVision DVR 10 User Manual 63
• 30 seconds
• 1 minute
• 2 minutes
• 5 minutes
• Never
Audio preview
Check the Audio Preview check box if you want the TVR 10 to play the audio of the
camera when displaying a single camera.
Display layout setup
Use this option to define the order of the cameras to be displayed when in live mode.
If you have selected a four-screen display mode, the video frame should display four
panels. Select a panel and press a numeric button corresponding to the camera
number you want to display in that panel. Continue for each camera. The preview
order is displayed on a status bar below the preview frame as shown in Figure 22 on
page 62.
Saving the display setup
Click Confirm to save your setup.
Recording settings
Use the Recording Configuration screen, shown in Figure 23 on page 64, to define
how the TVR 10 records video. The following options can be configured:
• Handling of information when the HDD is full
• Audio and/or video recorded
• Bit rate
• Frame rate
• Camera resolution
• Recording schedule of a camera
• Pre and post recording times for alarm recordings