User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 5: Advanced setup
TruVision DVR 10 User Manual 61
Figure 21: Date & time screen
To configure the TVR 10 system date and time:
1. Select Display in the main menu to display the Display Configuration screen.
2. Click Date & Time Setup to display the Date & Time screen.
3. Specify a date format using the Date Display Mode list box.
The following are available formats:
• MM DD YY
• DD MM YY
• YY MM DD
4. Enter a date.
Click the Date edit box to enter into edit mode. Use the number buttons to enter a
date.
5. Enter the time.
Click the Time edit box to enter into edit mode. Use the number buttons to enter
the time.
6. Check Daylight Saving Time (if applicable).
Check the Enable DST check box to enable Daylight Saving Time. Select the
month, date and time when Daylight Savings starts and stops using the From and
To list boxes.
7. Click Confirm to save your changes.