User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 5: Advanced setup
TruVision DVR 10 User Manual 59
Check the check box or use the Up or Down Arrow buttons and the ENTER button
to enable or disable these options.
5. To copy the alarm rules to another day, select a day in the Copy to list box and
click Copy.
6. Click Confirm on the Rules screen to save your setup.
Note: The TVR 10 will prompt you to reboot in order for the schedule to take
effect.
Display settings
Use the Display screen to configure how information is displayed on screen. The
following options can be configured:
• Device ID
• Password requirement option
• Video output standard
• Video scaling
• Menu transparency
• System time and date
• Multiscreen
Device ID
The device ID provides a means for an IR remote control to connect to the TVR 10. If
there is more than one TVR 10 in a setting, you must define a different device ID for
each TVR 10. Otherwise, the IR remote control will control all TVR 10s with the same
device ID at the same time. The default device ID is 01.