User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 5: Advanced setup
TruVision DVR 10 User Manual 43
If the initial and verify passwords entered are identical, the password is saved and
becomes effective immediately. However, if both passwords do not match, a
warning message appears as shown in the figure below. Press ENTER to confirm
and you are returned to the password edit box to the new password again.
Adding a new user
Only the system administrator can add or delete users. Up to 15 users can be
created.
To add a new user:
1. Click User on the main menu to display the User screen.
2. Click Add to display the Add screen as shown in the figure below.
3. Enter a new user name using alphanumeric characters.
4. Click Confirm (or press ENTER) to confirm. The User screen displays with the new
user name listed.