User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
TruVision DVR 10 User Manual 41
Chapter 5
Advanced setup
This chapter covers the advanced setup of your TVR 10. Only users with appropriate
access privileges can define and modify advanced configurations. When the
following settings are modified and saved, you will be prompted to reboot the TVR 10
in order for the new settings to take effect. You do not need to reboot the device for
any other configurations.
• Any network configurations
• Resolution and record schedule
• External alarm sensor type
• View tampering alarm schedule
• Video loss alarm schedule
• Motion detection alarm schedule
• External alarm schedule
• Alarm output schedule
User settings
The TVR 10 is shipped with one predefined user for the system administrator. The
default system administrator log on uses admin as a user name with a default
password of 1234. You can modify the admin password but not the admin user
name.
The administrator can create up 15 users and define their privileges. When new users
are added to the list, the administrator can define individual passwords or each user
can use a default password.