User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 4: Basic operation
32 TruVision DVR 10 User Manual
The Manual Record screen displays listing all cameras. The camera status line
shows which cameras are currently recording.
3. Click the camera’s Start/Stop line to begin the recording. A checkmark appears on
that camera’s Start/Stop box.
4. Select the next camera you want to start or stop recording. Repeat step 3.
5. To select all cameras for recording, click Start All.
All camera status LEDs on the front panel and the on-screen camera status icons
on the status bar turns green.
6. Click Stop All to stop recording for all cameras.
7. Right-click or press ESC to save changes and return to the live mode.
Playing back video
The TVR 10 lets you play back recorded video. This section describes the features and
methods in playing back video.
Play Back screen
The Play back screen lets you search and view recorded video. You must be in live
mode to view video. Search for recorded video using different criteria including:
• Motion detection, alarm, or manually recorded files
• Start and end time of recording
Note: You must have access privileges to enter the Play Back screen.
See Table 12 on page 33 for a description of the Play Back screen controls and
options.