User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 4: Basic operation
30 TruVision DVR 10 User Manual
Front panel Press PTZ to enter PTZ mode. Press REC and enter a preprogrammed three-
digit preset number. Preset starts immediately.
If you enter a one or two-digit number, depending on your TVR 10 model,
you will change the selected camera.
This function is only available if the mouse is not connected to the TVR 10.
Remote control Press PTZ to enter PTZ mode. Press SHOT and enter a preprogrammed
three-digit preset number. Preset starts immediately.
If you enter a one or two-digit number, depending on your TVR 10 model,
you will change the selected camera.
This function is only available if the mouse is not connected to the TVR 10.
Mouse Right-click and select PTZ control to enter PTZ mode. Right-click again and
select Preset. Select one of the preset numbers listed.
PTZ preset numbers are preprogrammed.
When you exit PTZ control mode, the camera stays at the current position.
Note: The PTZ preset position must already be configured. Refer to “PTZ settings” on
page 76 for more information. You can define up to 128 preset positions.
Exiting PTZ control mode
Press ESC or ENTER to exit and return to the live mode.
Manual recording
When a camera is recording, its corresponding LED on the front panel lights up in
green. This green LED is also lit when recording manually. Start or stop a camera
recording by pressing the REC button and entering the Manual Record menu.
Note: You must have access privileges to enter the Manual Record dialog screen.
Manual Record screen
To enter the Manual Record screen while in live mode, press REC and enter your user
name and password if requested.