User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 4: Basic operation
28 TruVision DVR 10 User Manual
Figure 11: Login screen
To log on to the TVR 10 user interface:
1. In the User box, select a user.
2. Enter the corresponding password in the Password edit box.
3. Click Confirm to enter the main menu.
If there is no response, it means the user name and password are not matched.
The TVR 10 will enter the live mode if you enter unmatched logon credentials
three times.
Controlling a PTZ camera
The PTZ control interface lets you control the PTZ operation of the cameras within the
TVR 10 user interface. You can control PTZ cameras using the buttons on the front
panel and IR remote control as well as utilizing the PTZ control icons accessed with
the mouse. To display the PTZ control interface, the user must have PTZ control
access privileges.
Displaying the PTZ control interface
While in menu mode, right-click and then click PTZ control to display the PTZ control
interface directly. Select a user name and type the correct password in the Login
screen. The PTZ control interface displays as shown in Figure 12 on page 29. You can
adjust the position of the current camera display on the screen.