User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 4: Basic operation
TruVision DVR 10 User Manual 27
Press DISP to manually toggle through single camera and four-screen views . The
single camera display reverts back to camera 1 when switching to single view. You
can set the auto live mode on the Display menu.
Viewing in multiscreen
Mouse Right-click to open the mouse menu, and then click Multi Screen.
Select the desired display layout. You can select either a four-
screen or single screen view.
Front panel/remote control Press DISP to switch to multiscreen display viewing.
Connecting the spot monitor
To connect the spot monitor:
1. Connect Video out 2 with the spot monitor by a cable.
2. While in live mode, right-click and click Spot Channel.
3. You now have access to the secondary monitor.
Note: Make sure that there is video signal input; otherwise the spot monitor will
only show a blue screen.
Logging on
The TVR 10 is shipped with one predefined user for the system administrator. The
default system administrator log on uses “admin” as a user name with a password of
1234. You can modify the admin password but not the admin user name. We
recommend that you change the admin password once you have completed the
installation and setup to protect against unauthorized access. The administrator can
create up to 15 users and define their privileges. For more information, see “
User
settings” on page 41.