User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 3: Operating instructions
TruVision DVR 10 User Manual 23
Use the numeric buttons on the remote control to enter characters. Press the
numeric buttons repeatedly to cycle through different characters available for
that button. The character format and type depends on the value you selected in
step 2. Use the Left or Right Arrow buttons to move the cursor within the edit box.
Use the DEL button in the remote control to delete the character left of the cursor.
4. Press OK to accept the value you’ve entered, or ESC to exit from the edit box
without saving any changes you’ve made.
Exiting the main menu
Right-click and then click Camera or Multiview to exit the main menu and return to
live mode. Press ESC on the front panel or remote control to exit the main menu and
return to live mode.