User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
Chapter 3: Operating instructions
10 TruVision DVR 10 User Manual
Controlling the TVR 10
You can control the TVR 10 using:
• Front panel control
• IR remote control
• Mouse control
Front panel control. Use the directional arrow buttons to select a command, option,
or button on a screen. Use the ENTER button to confirm a selection.
IR remote control. Use the directional arrow buttons to select a command, option, or
button on a screen. Use the OK button to confirm a selection.
Mouse. Move the pointer to a command, option, or button on a screen. Click (with the
left mouse button) to confirm a selection.
You can use your preferred control method for any procedure, but in most cases we
describe procedures using mouse terminology. Optional control methods are given
only when they differ substantially from mouse control methods.
Front panel overview
The buttons on the front panel control all DVR functions. The LED indicators light up or
flash to alert you of various conditions. See Table 2 below for more information.
Figure 3: Front panel introduction
e
2 3 41 MENU
Disp Srch
PTZ Live Rec Esc
Power
HDD
Tx/Rx
TVR10
2
1 3
Table 2: Front panel legend
Item Type Name Description
1 Status
LEDs
Power Green indicates the DVR is working. No light indicates the DVR
is powered off.