User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support

Chapter 2: Installation
8 TruVision DVR 10 User Manual
Connection diagram
Use Figure 2 below as a visual guide to connect the various peripherals to the TVR 10.
Figure 2: Rear panel connection diagram
13
42
VIN VOUT
1
2
AIN AOUT
ETHERNET
VGA
RS-485
ALARM IN
OUT
POWER
+12V
T+T-R+R-1 G
1234GG
Power
Link/Act
100
FD/Col
12345678
1. Connect up to four cameras
2. Connect up to two CCTV monitors (one for main,
two for spot)
3. Connect to a VGA monitor
4. Alarm output
5. Connect to a PTZ control
6. Connect to a USB mouse
7. Connect to audio input
8. Connect to speakers
9. Connect to network devices
10. Connect to alarm input cables
11. Connect to the power supply