User manual
Table Of Contents
- Product overview
- Features
- Installation environment
- Unpacking the TVR 10 and its accessories
- HDD capacity
- Back panel overview
- Connection diagram
- Control interfaces
- Controlling the TVR 10
- Front panel overview
- Using the mouse
- Using the IR remote control
- Using the Web browser
- Main menu overview
- Turning on the TVR 10
- Live mode
- Connecting the spot monitor
- Logging on
- Controlling a PTZ camera
- Manual recording
- Playing back video
- Archiving recorded files
- Turning off the TVR 10
- User settings
- Camera settings
- Display settings
- Recording settings
- Alarm settings
- Network settings
- PTZ settings
- Modifying the device name
- Restoring to factory defaults
- Managing the hard drive
- Acknowledging an alarm
- Rebooting the TVR 10
- Viewing logs
- Upgrade methods
- Upgrading with a USB flash memory
- Upgrading through the Web browser
- Setting up the wftp32 FTP server
- Upgrading using the FTP server
- Display interface
- PTZ interface
- Camera name position configure interface
- Area configure interface
- Text input interface
- Playlist interface
- User interface
- Menu defaults
- Network defaults
- Warranty information
- Contacting support
TruVision DVR 10 User Manual 103
Appendix E
Factory defaults
Menu defaults
Function Setting
Date format MM/DD/YY
Normal record speed 30 frames per second (NTSC), 25 frames per second (PAL) at CIF
Stream type Audio & Video
Menu timeout 1 minute
Video standard NTSC
Disk overwrite mode Overwrite
Brightness 50%
Contrast 50%
Hue 50%
Saturation 50%
Daylight Savings Time Off
Network defaults
Function Setting
IP address 192.168.111.111
Subnet mask 255.255.255.0
Gateway address 0.0.0.0