User manual

12
4) HOW TO SET PROTOCOL
① Please the power off
② Switch protocol that user wants to change on as above the cable
③ The power on, then the set protocol and baud rate are appealed.
④ The power off, if every setting is right. Then the change of protocol is finished.
⑤ Change No. 3 of S2 to ADDR before the power on, then the power on after setting the address of the camera.
⑥ Try it again with the information as above the table, if something is wrong
PROTOCOL S 1
S 2
SW 1
SW 2
SW 3 SW 7 SW 8 SW ‘INITADDR’
D-MAX (9600
bps)
OFF
OFF
OFF
OFF OFF INIT
P-P (9600 bps) ON
OFF
OFF OFF OFF INIT
P-P (4800 bps) ON
OFF
OFF OFF ON INIT
P-P (2400 bps) ON
OFF
OFF ON OFF INIT
P-D (9600 bps) OFF
ON
OFF OFF OFF INIT
P-D (4800 bps) OFF
ON
OFF OFF
ON INIT
P-D (2400 bps) OFF
ON
OFF
ON OFF INIT
S-T (9600bps) OFF
OFF
ON OFF OFF INIT
You have to change this switch when you
change protocol
1 2 3 4 5 6 7 8
O
N
4
2
2
I
N
I
P
A
L
I
N
T
ON
OFF
A D D R E S S
T
M
4
8
A
D
N
T
E
X
O
O
F
S 1
Change No.3 of S2 to INIT if user
wants to change protocol
Use to change this switch Protocol
and communication speed
The switch to select
protocol
The switch to select
baud rate