MODEL: SDI57HY Hybrid Portable Test Monitor User Manual
Precautions • Always handle the unit with care to avoid damaging the LCD display panel. Damage caused by physical shocks is not covered by the product warranty. • Avoid getting fingerprints on the screen. To clean the screen, wipe it with a clean, soft and dry towel, being careful not to damage the LCD display panel. • To reduce the risk of fire or electric shock, do not expose the LCD to rain or moisture. • Do not connect power to the video input/output ports. It will cause a malfunction.
1. Introduction Overview The SD157HY is a multi-functional Analogue / HD-SDI / HDMI portable test monitor. It can be used for various purposes, including checking video signals, adjusting camera angle of view and focusing, supplying power to camera and controlling a speed dome camera.
3. Product Parts and Peripheral Device Connection Part Names and Functions 1 2 3 4 5 6 7 8 No. Marking 1 DC12V Charge the Built-In Li-Polymer Battery (with Included Charger) or, Supply Power to the Camera (DC12V/500mA) via Power Harness. 2 RS-485 RS-485 Communication for PTZ Receiver and Speed Dome Camera 3 HDMI INPUT 4 5 HD-SDI VGA INPUT 6 7 8 INPUT VIDEO POWER Function HDMI Signal Input (Max. 1920 x 1080p60Hz) HD-SDI Signal Input (Max.
Buttons for Each of the Functions 3 2 HDMI 16:9 1920 x 1080p60 1 Button 6 1 Menu Operation Buttons Camera Menu RS-485 & Coax Mode Angle Guide Video Input MODE PTZ&OSD Mode Switch EXIT Operate in PTZ Mode MENU Operate in OSD Mode Menu ON ESC Operate in OSD Mode Menu OFF Multi-Way Key Up, Down, Right, Left ENTER Key ENTER Source Change Angle Mode Out Pan/Tilt/Zoom/ Focus Zoom In (Analogue) Up, Down, Right, Left Select Bar 2 Video Status • Input Mode: HD-SDI, HDMI, VGA, CVBS • Dis
Connection Diagram ※ Only use the included power harness cable when supplying power to a camera. HD-SDI Input • Connect to HD-SDI camera / output the power to camera using power over coax feature (Input data bitrate: ~3G). Analogue Video Input • Connect to Analogue Camera • Output the power (DC12V/500mA) to camera using power over coax feature. • Using Coax communication feature (Coaxitron), it is possible to control the camera OSD menu or a PTZ Speed Dome camera via coaxial cable.
※ Power over coax feature (Video+Power) for Analogue VP camera and VP transmission devices.
ANGLE MODE Indication lines: To adjust the viewing angles based on a specific area. Selecting ANGLE MODE displays a green box and the camera angle zone indication lines. Press the SET MENU button to select the size of the green box. Press the SET MENU button again and select the side lines of the box you want to adjust, and press the / / / buttons to set the position of each line. To exit ANGLE MODE, press the EXIT KEY.
※ Built-in Protocols: No.
RS-485 (TX) • Displays the current setting mode at the top of the screen. • Press SET KEY in MULTI WAY KEY selection to select PAN/TILT or ZOOM/FOCUS mode. - RED: P.T.Z MODE - BLUE: OSD MODE • Press the Mode KEY to select CAMERA OSD control mode. • Press the MENU KEY to control CAMERA OSD and press the ESC KEY to exit OSD MENU. • In case of BOX/DOME Camera, hold the ENTER KEY to select the OSD Menu.
COAX [UP THE COAX] Control • Displays the current setting mode at the top of the screen. • Press the SET KEY in MULTI WAY KEY selection to select PAN/TILT mode or ZOOM/FOCUS mode. - RED: P.T.Z MODE - BLUE: OSD MODE • Press the Mode KEY to select the CAMERA OSD control mode. • Press the MENU KEY to control the CAMERA OSD, and the ESC KEY to exit OSD MENU. For BOX/DOME Cameras, Hold the ENTER KEY to select OSD Menu • Press the EXIT KEY to go to the previous mode.
SYSTEM SET • To set the System Language: KOR / ENG / JAP / RUS OSD Dwell Time: To set the time to turn the monitor menu OFF BACK LIGHT: To adjust the brightness of the LED Monitor. Setting Initialisation: To initialise all settings. Version: To display the product Firmware version and the date. • • • • • 5. Specification LCD SD157HY Hybrid Test Monitor DISPLAY RESOLUTION 1024 x 600 (RGB) SIZE 7 inch (Diagonal) PIXEL PITCH 0.15mm (H) x 0.
GENIE CCTV LTD. CCTV House, City Park, Watchmead, Welwyn Garden City, Hertfordshire, AL7 ILT Tel: +44 (0) 1707 330541 Fax: +44 (0) 1707 330543 www.geniecctv.com Edition.
