User manual

21
 Memorize PTZ Trace : Enter number (9) and then press MENU button, ON
button respectively.
¨ ¨
 Delete memorized PTZ Trace : Enter number (9) and then press MENU button,
OFF button respectively.
¨ ¨
When manipulating according this setting the message of “Trace memory” appears
on the screen. At the moment, move pan, tilt and zoom with the joystick.
If the memory time expires, the memorizing stop automatically and memorized ptz is
registered.
11) Camera Remote Reset
This is same as the action switching power off and on (it means reboot) and doesn’t
influence preset memory data.
 Enter desired camera number (1~255) and then press CAM button, then enter
number 10, press MENU button, ENT button.
¨ ¨ ¨ ¨
12) Brightness control of LCD
This function is controlling the brightness of LCD and being able to be used where
desired location.
 Enter number (20) and then press MENU button and move JOYSTICK UP/DOWN
and then press CLR button.
 Brightness Up
¨ ¨ ¨
 Brightness Down
¨ ¨ ¨
13) Alarm On/Off
Using alarm sensor with preset or any equipment, press ALARM button and if related
sensor actuated then it makes sure of alarm sound at the same time the related
equipment is working. Press again ALARM button or CLR button then the function is
cancelled.
 Alarm On :
 Alarm Off :
or
9 MENU
ON
9 MENU
OFF
1~255 CAM
10
MENU
ENT
20 MENU
CLR
up
20 MENU CLR
dow
ALARM CLR
ALARM