User manual

19
(d) Enter dwell time (1 ~ 127).
¨
(e) To save and exit group set mode press SET button.
 Run Group : Enter group number (1~6) as desired and press GROUP button.
¨
 Stop Group : press GROUP button or touch the joystick.
 All Group Clear
Press CLR button for a while (more than 3 sec.) and press GROUP and ENT button.
¨ ¨
8) Tour (it means auto-tour surveillance function)
The keyboard should be programmed 1 of tour sequence included up to 6 groups.
It means auto-tour with memorized group.
¨
¨
 Set tour mode
(a) Press SET and TOUR button.
¨
(b) Enter group number as desired number. It should be programmed up to 6 groups.
¨
(c) Adding group number, repeat the process of (b). For example, if the desired 6
groups in a tour sequence, set as follows.
¨ ¨ ¨ ¨ ¨ ¨
¨ ¨ ¨ ¨ ¨ ¨
¨
1~127
ENT
1~127
ENT
CLR
GROUP
ENT
- SET TOUR –
Group Number? 1-6
Camera : 001
Input? 
[MAIN]
- SET TOUR –
Group Number? 1-6
Camera : 001
Save-1
- SET TOUR –
Group Number? 1-6
Camera : 001
Save-6
SET TOUR
1~6 ENT
1 ENT
2 ENT
3
ENT
3
ENT
4 ENT
5
ENT
6 ENT