User manual

17
Ex) delete the preset number 5.
¨ ¨ ¨
Press CLR button, number (5), P-SET, and ENT button respectively.
 Delete all preset
Press CLR button for a while (more than 3 sec), and press PST button and press finally
ENT button.
¨ ¨
6) Swing
The keyboard can be programmed 1 of swing for pan swing and tilt swing in each.
It should be run auto pan surveillance between memorized two preset position as desired
and it should be also auto tilt surveillance between memorized two preset position as
desired.
 Set swing mode
(a) Press SET and SWING button.
(c) It appears message on the LCD as left.
(d) Enter number 1 or 2 to select pan/tilt swing.
¨
(e) If you select pan swing. It appears next view.
(f) Enter preset number for SW Start No.
¨
(g) Enter preset number for SW End No.
¨
(h) Enter swing dwell time on the LCD.
¨
(i) The dwell time can be set 1 to 127 seconds.
(j) Enter swing speed value on the LCD.
¨
(k) The swing speed can be set 1 to 64 steps.
(l) Finally, after enter speed value, it should be
escaped the swing set mode automatically.
CLR (press more than 3
5 P-SET ENT
CLR P-SET
ENT
- SET SWING –
SW Mode :
1=Pan 2=Tilt
Camera : 001
- SET SWING –
SW Start No?
Camera : 001
In
p
ut ? 
- SET SWING –
SW End No?
Camera : 001
Input ? 
- SET SWING –
SW Time? 1 – 127 sec
Camera : 001
Input ? 
- SET SWING –
SW Speed? 1 – 64
Camera : 001
Input ? 
1 or 2 ENT
1 ~ 64 ENT
1 ~ 64 ENT
1
ENT
1 ~ 64 ENT