User manual

15
4) Camera Setup (Enter into OSD Menu)
 OSD (On Screen Display) Control
The Keyboard can be controlled speed dome camera, ptz dome camera with OSD
menu.
 Enter into OSD Menu
KEYBOARD FIGURE
+
(1) Press number 1 and MENU button respectively to enter OSD menu on the
screen.
NOTE : The distance time between push 1 and MENU button is about 2 ~ 3 sec.
 The shift of cursor in OSD Menu
(a) Cursor to left – move the joystick left
(b) Cursor to right – move the joystick right
(c) Cursor to up – move the joystick up
(d) Cursor to down – move the joystick down
(e) Enter – move the joystick left or right on the parameter
(f) ESC – move the joystick left or right according to message on parameter
 Save and quit in OSD
+
(a) Press again number 1 and MENU button
(b) After set or change parameters, press again number 1 and MENU button
respectively to escape from OSD menu with saving or without saving.
ALL RUN HOLD
1 2 3
4 5 6
7
CLR
8
0
9
ENT
P-SET SWING GROUP TOUR SET
Z/I
F/F
Z/O
F/N
MENU STATUS
1
MENU
1
MENU