Instruction manual

24
- UART MODE : You can select NONE, EVEN or ODD for the parity bits.
- RET PKT : Determines whether to send a command back to the controller device when a communication
control command is sent to the camera.
- DISP CAM ID : Display camera title on top left corner of the screen.
● LANGUAGE : You can select the menu language according to your requirements.
● RESET : Resets the camera settings to the factory defaults.
● RETURN : Select this to save the SPECIAL menu settings and return to the SPECIAL menu.
⑨ EXIT
Press the SET button in the EXIT menu to save the current settings and exit the SET menu.