Instruction manual

15
④ Backlight
This camera is designed so that it delivers a distinctive subject and background at the same time, even when
the subject is in backlight, unlike conventional cameras, by adopting a proprietary SV-IV DSP chip.
1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Up and Down buttons so
that the arrow indicates BACKLIGHT.
2. Select a desired mode using the Left and Right buttons depending on the camera purpose
.
● WDR : When there are both bright and dark areas at the same time, this mode makes both areas
distinctive.
● OFF : Deactivates the WDR function.
● BLC : Enables a user to directly select a desired area from a picture, and to view the area more clearly.
3. Select a desired mode using the Left and Right buttons and press the SET button.
• Select WDR to adjust the WDR LIMIT. Select LOW,
MIDDLE, or HIGH.