User manual

the type of monitor and accessories.

Please refer to the user's manual for each

instrument.

Please turn off the power when connecting.

3) Connecting to power

DC Power Type (DC 12V, 500mA)

Please use the specified lens connection parts as

shown in the picture below.

The use of the wrong sized parts may cause

damage to the inside of the camera or result in

poor fitting.

Use of a lens which is too heavy affects the balance

of the camera and may cause a malfunction.

Please use a lens that weighs less than 450g.

Please select Av mode if possible when adjusting

the automatic light control (ALC) of an auto lens.

Use of PK mode may cause hunting

2) Connecting to a monitor

Please connect the video output terminal located

on the back of the camera to the monitor.

The connection method varies depending on

Note

‚·ˇ¯˝

CCD ˜«‚ ¶