DAZ-530/523(동양표지3.10) 2008.3.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지1 Contents 1. Precautions 2. Features …………………………………………… 2 ………………………………………………… 3 3. Products Components ………………………… 5 4. Name and Functions of Each Parts ……… 6 1) Front ………………………………………………… 6 2) Back ………………………………………………… 7 5. Connection …………………………………………… 9 1) Connecting to Monitor ………………………… 9 2) Connecting to Connection…………………… 9 6. Operating Your Camera ……………………… 1 2 1) Menu Configuration …………………………… 1 2 2) Menu Setup ……………………………………… 1 2 7.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지2 1. Precautions Cautions ! This information is provided to ensure your safety and to prevent any loss, financial, Please read it carefully and use the products accordingly. ● Warning ! ! ! ! ! Installation of this product by unqualified personnel is strictly prohibited, Please consult an experienced installer or authorized retailer for proper installation to avoid possible fire or electric shock.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지3 2. Features High Magnification Zoom Lens High 230 x zoom function. (x 23 Optical zoom, x 10 Digital zoom) : DAZ-523 High 300 x zoom function. (x 30 Optical zoom, x 10 Digital zoom): DAZ-530 High resolution 520TVL Color : more than 520TVL, B/W : more than 570 TVL. SSNR Function Low illumination noise has been significantly reduced and resulting in a clear and sharp image display in the dark.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지4 the processing unit without separate sensor (Output MD of External signal) Miscellaneous Functions Preset, Privacy Zone Masking, Digital zoom. Image Pause, Mirror Effect, Up Down reversion etc. Control via OSD menu and RS-485 The OSD menu and RS-485 pins allow for remote control for the camera, the user can control the lens using external control connection. Multi Protocol Various Protocol available by using Multi Protocol function. Remote reception (option.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지5 3. Products Components 1. Color zoom camera (DAZ-530 / DAZ-523) 2.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지6 4. Name and Functions of Each Parts 1) Front 1. Tripod Mounting Bracket Screw Hole Used to fix tripod mounting bracket on top of the camera. Tripod mounting is attached on bottom of the camera but it can install the mounting in the top of camera when the user need. The measurement of suitable screw for the holes 2.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지7 2) BACK ① Key Buttons UP (TELE button) : To move the arrow indicator to up - To close in on a far object. (ZOOM IN) DOWN (WIDE button) : To move the arrow indicator to down - To widen the view. (ZOOM OUT) SET: To access the main setup menu.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지8 ☞ Notes If the Adaptor Power Line is extended improperly, it may cause malfunctions since the camera is affected by unstable voltage condition. Ensure Power Supply Source: DC 12V ± 10%, 500mmA The wire is polarized. Match "+" and "-" terminals properly ④ Video Output Jack - Used to connect an external video monitor in jack. ⑤ External Control Connector - Zoom and focus functions can be controlled by using external signal, RS-485 communication.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지9 5.
DAZ-530/523(동양본문3.10) 2008.3.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지11 Protocol setting Select the protocol to move the arrow indicator below No. Protoco No.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지12 6. Operation Your Camera 1) Menu Configuration CAM TITLE WHITE BALANCE BACKLIGHT MOTION DET EXPOSURE SPECIAL MAIN SETUP MENU OFF O N ATW OFF HIGH OFF ZOOM TRK DISP ZOOM MAG LENS INIT BRIGHTNESS AGC END USER PRESET SYNC END AWC →SET LOW MANUAL MIDDLE ON FOCUS ZOOM SPEED ZOOM POS INIT END IRIS SSNR MODE D-ZOOM PRIVACY COMM ADJ DAY&NIGHT IMAGE ADJ RESET EXIT 2) Menu Setup Use the six buttons on back of the camera.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지13 1. Press the SET button to access the main setup mode. Main setup menu is displayed on the monitor screen. 2. Select the desired feature by using the UP or DOWN button. 3. Change the status of the selected feature by using the LEFT or RIGHT button. 4. When completed, move the arrow indicator to 'EXIT' and press the SET button. ☞ Notes Features marked with a ' ' have an accessible submenu.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지14 2. Set‘C A M T I T L E’to 'ON' by using the LEFT or RIGHT button. ☞ Notes If the CAM TITLE feature is set to 'OFF', the name will not displayed in the monitor. 3. Press SET button. 4. You can enter up to 20 characters. ① Move the cursor to the character entry field by using the LEFT or RIGHT button. ② Use UP, DOWN, LEFT, and RIGHT buttons to select a desired character. ③ Press the SET button to confirm selection of the blinking character.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지15 5. Select on screen position of the CAM TITLE. ① Move the cursor to 'POS' and press SET button. ② The CAM TITLE is displayed on the top-left of the monitor screen. (Default position) ↑↓ ③ Select the position by using the 4-directional buttons, then press the SET button to confirm the position. 6. When completed, move the cursor to‘E N D’and press SET button.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지16 DOWN button. 2. Set 'WHITE BAL' using the LEFT or RIGHT button. ※ The three white balance control modes are as follows. ▶ ATW(Auto Tracking White Balance) : OUTDOOR: This mode can be used within the color temperature range 1800~10500°K (Ex: fluorescent light, outdoor, sodium vapor lamp or inside tunnels) INDOOR : This mode can be used within the color temperature range 3000K~10500°K .
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지17 watching the color of the picture, and press the SET button when you obtain the best color. ☞ Notes Proper White Balance may not be obtained under the following conditions. ① When the scene contains mostly high color temperature object, such as a blue sky or sunset. ② When the scene is dim. ③ If your camera directly faces a fluorescent lamp or is used in an environment of varying lighting conditions.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지18 ▶ OFF : BACKLIGHT function does not operate. MOTION DET This product has a feature that allows you to observe movements of objects in 4 different areas on the screen, and the words 'MOTION DETECTED' appear on the screen when movement is detected; hence a single individual can conduct supervision efficiently. The camera detects an object's movement by sensing disparity of outline, and level of brightness and color.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지19 ① Please press the SETUP button. - OFF : MOTION DETECTION mode is cancelled. - ON : Any motion in the selected areas is observed. ▶ DISP ALARM : Appear the word "MOTION DETECTED" when the subject moves. ▶ AREA SEL : Select the area user wants to observe in the 4 areas ▶ AREA MODE : Select to appear the word "MOTION DETECTED" on the screen. ▶ TOP, BOTTOM, LEFT, RIGHT : Adjust the size of area to be observed by using button.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지20 FOCUS 1. Press the SET button to access the main setup manu and then position the indicator over FOCUS using the UP or DOWN button. 2. Press the SET button. ▶ MODE : You can select the most suitable zoom mode. Move the arrow indicator to‘M O D E’by using UP or DOWN button. Digital zoom is operated after optical zoom (x23, x30) is finished.
DAZ-530/523(동양본문3.10) ONE PUSH : Focus is automatically adjusted just once, after zoom position is changed. Select‘ONE PUSH’and press the SET button to confirm. Increase or decrease optical zoom (ZOOM) or digital zoom (D-ZOOM) positions by using the directional buttons while verifying the changes on screen. Press the SET button once desired image quality is obtained. 2008.3.10 4:33 PM 페이지21 AUTO : Select AUTO and press the SET button to confirm.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지22 ▶ ZOOM SPEED : Configure zoom tracing speed by using this feature. Position the indicator over 'ZOOM SPEED' by using the UP or DOWN button and then set todesired mode by using the LEFT or RIGHT button. ▶ D-ZOOM : Configure magnification limit from x2~x10 using this feature. Position the indicator over ‘D - Z O O M’by using the UP or DOWN button. Set‘D-ZOOM’to’ O N’and press the SET button to confirm.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지23 ▶ ZOOM POS INIT : Moves to the controlled ZOOM position when the power truned on and is a function of the initial ZOOM position control. ▶ LENS INIT : Use this feature to initialize the lens. Position the indicator over LENS INIT. By using the UP or DOWN button. Press the SET button to confirm. ☞ Notes Use this feature to initialize the lens regularly, it is helpful to focus movement properly.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지24 ▶ END : To revert to the main setup menu. EXPOSURE 1. Press the SET button to access the main setup menu and then position the indicator over 'EXPOSURE' by using the UP or DOWN button. 2. Press the SET button to confirm. ▶ BRIGHTNESS : Use this feature to adjust image brightness. Position the indicator over 'BRIGHTNESS' using the UP or DOWN button.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지25 then select the desired iris mode using the LEFT or RIGHT button. AUTO : The iris is automatically activated upon illumination. MANUAL : Manual iris configuration. Set 'IRIS' to 'MANUAL' by using the LEFT or RIGHT button and then press the SET button. Increase or decrease iris level by using the LEFT or RIGHT button while verifying the changes on screen. ▶ SHUTTER : Control image brightness by adjusting shutter speed. 1.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지26 A.FLK : (NTSC: 1/100, PAL: 1/120):Flicker-free mode. ESC : Automatic shutter speed setting (optimal). MANUAL : Manual shutter speed setting. 2. If you choose 'MANUAL', select the optimal shutter speed. In MANUAL mode, the optimal shutter speed needs to be designated. Select from 1/60 to 1/120,000 (NTSC) or from 1/50 to 1/120,000 (PAL). ※ 'Sens-Up' mode can be configured manually (2x to 128x).
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지27 ▶ AGC (Auto Gain Control) : For brighter images. 1. Position the indicator over 'AGC' by using the UP or DOWN button. 2. Set 'AGC' to the desired mode by using the LEFT or RIGHT button. HIGH: Wide range gain value adjustment MIDDLE: Middle range gain value adjustment LOW: Narrow range gain value adjustment OFF: Disabled ▶ SSNR (Samsung Super Noise Reduction) : 1. Position the indicator over‘S S N R’by using the UP or DOWN button. 2.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지28 ☞ Notes Changing 'AGC' setting from LOW to HIGH results in greater sensitivity, as well as on screen noise. USSNR function is disabled in AGC mode 'OFF'. ▶ Sens-UP: This feature ensures clear images at night or under low lighting conditions. 1. Position the indicator over 'SENS-UP' using the UP or DOWN button. 2. Set 'SENS-UP' to the desired mode using the LEFT or RIGHT button. 3.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지29 ▶ END : ave the exist setting and move the Main Setup Menu. SPECIAL 1. Press the SET button to access the main setup menu and then position the indicator over 'SPECIAL' using the UP or DOWN button. 2. Press the SET button to confirm. ▶ USER PRESET : Preset user-designated configurations using this feature. Position the indicator over‘U S E R PRESET’using the UP or DOWN button and then set to ‘O N’by using the LEFT or RIGHT button.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM PRESET MODE : Configure initial settings under FOCUS, EXPOSURE, etc. PRESET SAVE : Save configured preset. PRESET CLEAR : Clear configured preset.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지31 END : Revert to the SPECIAL SETUP menu. ▶ PRIVACY: Mask privacy area by using this feature. The mask area expand/contract upon the zoom position. GROUP SEL : Choose up to eight groups. Each group has been can consisted of four mask areas. MASK COLOR : Adjust desired mask color level. AREA SEL : Configure eight mask areas. AREA MODE : Mask area display. TOP : To move the mask area up. BOTTOM : To move the mask area down. LEFT : To move the mask area left.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지32 ▶ DAY & NIGHT : Select from COLOR, BW or AUTO modes. COLOR: Color mode. B/W: BW mode. AUTO: The camera automatically detects lighting conditions and selects the mode accordingly. ☞ Notes When "AGC" is set to "OFF", AUTO MODE cannot be used but, only use "COLOR MODE" and "B/W MODE". When Use B/W mode under Sunlight or Halogen Lamp, the focus may be smear than normal light. ▶ DIS : The DIS mode can compensate for vibration of the camera.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지33 INIT : Internal synchronization ▶ COMM ADJ : Use this feature to select communication protocol. Position the indicator over 'COMMUNICATION' by using the UP or DOWN button. ☞ Notes Be careful of that It can be run by the CAM ID value when using RS-485 communication and the RS-485 can have a problem if DISP CAM ID is OFF because user can not memorize the ID. CAM ID : Assign an ID number to the camera (1 to 255).
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지34 PET PKT : Used to transfer a packet. ☞ Notes Be careful of using of RS-485 in COMM ADJ mode. BAUD RATE, UART MODE can be only operated in the default mode(9600bps, 8-N-1) in RS-485 communication. ▶I M A G E A D J : I n c l u d e s i m a g e quality or special function factors. FREEZE : Use this feature to freeze capture an image. H-REV : Use this feature to horizontally inverse the screen. V-REV : Use this feature to vertically inverse the screen.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지35 7. Troubleshooting Problem Solution Check the power cable and the wiring between No display the camera and the monitor. Ensure proper video cable connection (Video Out Jack). The lens could be dirty. Clean with a soft, clean piece of cloth. Dim display Adjust monitor settings. Adjust camera position if exposed to a strong light source. Dark display The camera is not functioning properly and its surface is hot. Adjust the monitor's contrast level.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 8. Specifications DAZ-530 Signal system Image Sensor Total Pixels Effective Pixels Resolution Scanning Frequency Scanning System Shutter Speed Min. Illumination Zoom Rate Min. Focus Distance Angle Field of view Back Light Day & Night Privacy Zone AGC Camera ID White Balance SSNR OSD Flip / Mirror Communication S/N Ratio Video Output Sync. System Operating Humidity Operating Temp.
DAZ-530/523(동양본문3.10) 2008.3.10 4:33 PM 페이지37 DAZ-523 Signal system Image Sensor Total Pixels Effective Pixels Resolution Scanning Frequency Scanning System Shutter Speed Min. Illumination Zoom Rate Min. Focus Distance Angle Field of view Back Light Day & Night Privacy Zone AGC Camera ID White Balance SSNR OSD Flip / Mirror Communication S/N Ratio Video Output Sync. System Operating Humidity Operating Temp.
DAZ-530/523(동양표지3.10) 2008.3.
