User`s guide

xStack Storage Management Center Software User’s Guide 97
Figure 6-10. Example of an IP Address that Belongs to a VLAN-Enabled Group
6.5.2 Ungrouping Ports
If you want to ungroup the ports in a LAG:
1. In the Network Settings View of the Main Display, click a LAG.
2. Perform one of the following steps:
– On the Network menu, click Ungroup Ports.
– In the Network Actions panel, click Ungroup Ports.
– Press the right mouse button and click Ungroup Ports from the shortcut menu.
Any of these steps ungroups the ports in the selected group.
3. Record your settings in Table C-3.
This “V” Indicates
That the IP
Address Selected
in the Main
Display is VLAN
Enabled