User manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
70
Forwarding & Filtering
Unicast Forwarding
Open the Forwarding & Filtering folder in the Configuration menu and click on the Unicast Forwarding link. This will
open the Unicast Forwarding Table, as shown below:
Figure 6- 32. Unicast Forwarding Table and Static Unicast Forwarding Table window
To add or edit an entry, define the following parameters and then click Add/Modify:
Parameter Description
VLAN ID (VID)
The VLAN ID number of the VLAN on which the above Unicast MAC address
resides.
MAC Address
The MAC address to which packets will be statically forwarded. This must be a
unicast MAC address.
Unit
Choose the Switch ID number of the Switch in the switch stack to be modified.
Port
Allows the selection of the port number on which the MAC address entered above
resides.
Click Apply to implement the changes made. Current entries can be found in the Static Unicast Forwarding Table as
shown in the bottom half of the figure above. To delete an entry in the Static Unicast Forwarding Table, click the
corresponding
under the Delete heading.