User manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
63
Click Apply to implement changes made.
To configure the parameters for a previously set MSTI, click on its hyperlinked MSTI ID number, which will reveal the
following screen for configuration.
Figure 6- 25. Instance ID Settings window - Modify
The user may configure the following parameters for a MSTI on the Switch.
Parameter Description
MSTI ID
Displays the MSTI ID previously set by the user.
Type
This field allows the user to choose a desired method for altering the MSTI settings.
The user has 2 choices.
• Add VID - Select this parameter to add VIDs to the MSTI ID, in conjunction
with the VID List parameter.
• Remove VID - Select this parameter to remove VIDs from the MSTI ID, in
conjunction with the VID List parameter.
VID List (1-4094)
This field is used to specify the VID range from configured VLANs set on the Switch to
add to this MSTI ID. Supported VIDs on the Switch range from ID number 1 to 4094.
This parameter can only be utilized if the Type chosen is Add or Remove.
Click Apply to implement changes made.