User manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual

First Time Connecting to the Switch

The Switch supports user-based security that can allow prevention of unauthorized users from accessing the Switch or

changing its settings. This section tells how to log onto the Switch.

NOTE: The passwords used to access the Switch are case-sensitive;

therefore, "S" is not the same as "s."

Upon initial connection to the Switch, the login screen will be presented, as shown below.

NOTE: Press Ctrl+R to refresh the screen. This command can be used at

any time to force the console program in the Switch to refresh the console

screen.

Figure 4- 2. Initial screen, first time connecting to the Switch

Press Enter in both the Username and Password fields. Then access will be given to enter commands after the command

prompt DGS-3324SRi:4#, DGS-3324SR:4#, DXS-3326GSR:4# or DXS-3350SR:4# as shown below:

There is no initial username or password. Leave the Username and Password fields blank.