User manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
276
Auth Start
Counts the number of times that the state machine transitions from
AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being
received from the Supplicant.
Auth LogOff
Counts the number of times that the state machine transitions from
AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message being
received from the Supplicant.
Authed Reauth
Counts the number of times that the state machine transitions from
AUTHENTICATED to CONNECTING, as a result of a reauthentication request
(reAuthenticate = TRUE).
Authed Start
Counts the number of times that the state machine transitions from
AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being
received from the Supplicant.
Authed LogOff
Counts the number of times that the state machine transitions from
AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-Logoff message
being received from the Supplicant.
Responses
Counts the number of times that the state machine sends an initial Access-Request
packet to the Authentication server (i.e., executes sendRespToServer on entry to the
RESPONSE state). Indicates that the Authenticator attempted communication with
the Authentication Server.
AccessChallenges
Counts the number of times that the state machine receives an initial Access-
Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing
exit from the RESPONSE state). Indicates that the Authentication Server has
communication with the Authenticator.
OtherReqToSupp
Counts the number of times that the state machine sends an EAP-Request packet
(other than an Identity, Notification, Failure, or Success message) to the Supplicant
(i.e., executes txReq on entry to the REQUEST state). Indicates that the
Authenticator chose an EAP-method.
NonNakRespFromSup
Counts the number of times that the state machine receives a response from the
Supplicant to an initial EAP-Request, and the response is something other than EAP-
NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from
REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the
Supplicant can respond to the Authenticator’s chosen EAP-method.
Bac Auth Success
Counts the number of times that the state machine receives an Accept message from
the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from
RESPONSE to SUCCESS). Indicates that the Supplicant has successfully
authenticated to the Authentication Server.
Bac Auth Fail
Counts the number of times that the state machine receives a Reject message from
the Authentication Server (i.e., aFail becomes TRUE, causing a transition from
RESPONSE to FAIL). Indicates that the Supplicant has not authenticated to the
Authentication Server.