User manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
237
The xStack DGS/DXS-3300 Switch Series incorporate a flexible SNMP management for the switching environment.
SNMP management can be customized to suit the needs of the networks and the preferences of the network administrator.
Use the SNMP V3 menus to select the SNMP version used for specific tasks.
The xStack DGS/DXS-3300 Switch Series support the Simple Network Management Protocol (SNMP) versions 1, 2c, and
3. The administrator can specify the SNMP version used to monitor and control the Switch. The three versions of SNMP
vary in the level of security provided between the management station and the network device.
SNMP settings are configured using the menus located on the SNMP V3 folder of the web manager. Workstations on the
network that are allowed SNMP privileged access to the Switch can be restricted with the Management Station IP Address
menu.
SNMP User Table
The SNMP User Table displays all of the SNMP User's currently configured on the Switch.
In the SNMP Manager folder, click on the SNMP User Table link. This will open the SNMP User Table, as shown
below.
Figure 8- 1. SNMP User Table
To delete an existing SNMP User Table entry, click the
below the Delete heading corresponding to the entry to delete.
To display the detailed entry for a given user, click on the hyperlinked User Name. This will open the SNMP User Table
Display page, as shown below.
Figure 8- 2. SNMP User Table Display
The following parameters are displayed:
Parameter Description
User Name
An alphanumeric string of up to 32 characters. This is used to identify the SNMP
users.
Group Name
This name is used to specify the SNMP group created can request SNMP messages.
SNMP Version
V1 - Indicates that SNMP version 1 is in use.
V2 - Indicates that SNMP version 2 is in use.
V3 - Indicates that SNMP version 3 is in use.
Auth-Protocol
None - Indicates that no authorization protocol is in use.