User manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
222
Figure 7- 14. Login Method List – Add window
To define a Login Method List, set the following parameters and click Apply:
Parameter Description
Method List Name
Enter a method list name defined by the user of up to 15 characters.
Method 1, 2, 3, 4
The user may add one, or a combination of up to four (4) of the following
authentication methods to this method list:
• tacacs - Adding this parameter will require the user to be authenticated
using the TACACS protocol from a remote TACACS server.
• xtacacs - Adding this parameter will require the user to be authenticated
using the XTACACS protocol from a remote XTACACS server.
• tacacs+ - Adding this parameter will require the user to be authenticated
using the TACACS+ protocol from a remote TACACS+ server.
• radius - Adding this parameter will require the user to be authenticated using
the RADIUS protocol from a remote RADIUS server.
• server_group - Adding this parameter will require the user to be
authenticated using a user-defined server group previously configured on
the Switch.
• local - Adding this parameter will require the user to be authenticated using
the local user account database on the Switch.
• none - Adding this parameter will require no authentication to access the
Switch.