User manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual

217

Application's Authentication Settings

This window is used to configure switch configuration applications (console, Telnet, SSH, web) for login at the user level

and at the administration level (Enable Admin) utilizing a previously configured method list. To view the following

window, click Security Management > Access Authentication Control > Application Authentication Settings:

Figure 7- 6. Application's Authentication Settings window

The following parameters can be set:

Parameter Description

Application

Lists the configuration applications on the Switch. The user may configure the

the Console (Command Line Interface) application, the Telnet application, SSH

and the Web (HTTP) application.

Using the pull-down menu, configure an application for normal login on the user

level, utilizing a previously configured method list. The user may use the default

Method List or other Method List configured by the user. See the Login Method

Lists window, in this section, for more information.

Enable Method List

Using the pull-down menu, configure an application for admin login on the user

level, utilizing a previously configured method list. The Enable Method Lists are

used to promote users with user-level access to Adminstrator-level privileges

using the selected Appilcation stated previously. The user may use the default

Method List or other Method List configured by the user. See the Enable Method

Lists window, in this section, for more information

Click Apply to implement changes made.