User manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
203
Figure 6- 167. DVMRP Interface Settings – Edit window
The following fields can be set:
Parameter Description
Interface Name
Displays the name of the IP interface for which DVMRP is to be configured. This must
be a previously defined IP interface.
IP Address
Displays the IP address corresponding to the IP Interface name entered above.
Neighbor Timeout
Interval (1-65535)
This field allows an entry between 1 and 65,535 seconds and defines the time period
DVMRP will hold Neighbor Router reports before issuing poison route messages. The
default is 35 seconds.
Probe Interval (1-
65535)
This field allows an entry between 1 and 65,535 seconds and defines the interval
between ‘probes’. The default is 10.
Metric (1-31)
This field allows an entry between 1 and 31 and defines the route cost for the IP
interface. The DVMRP route cost is a relative number that represents the real cost of
using this route in the construction of a multicast delivery tree. It is similar to, but not
defined as, the hop count in RIP. The default cost is 1.
State
This field can be toggled between Enabled and Disabled and enables or disables
DVMRP for the IP interface. The default is Disabled.
Click Apply to implement changes made. Click Show All DVMRP Interface Entries to return to the DVMRP Interface
Settings window.