User manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
194
Figure 6- 158. VRRP Virtual Router Settings - Display window
This window displays the following information:
Parameter Description
Interface Name
An IP interface name that has been enabled for VRRP. This entry must have been
previously set in the IP Interface Settings table.
Authentication type
Displays the type of authentication used to compare VRRP packets received by a
virtual router. Possible authentication types include:
• No authentication - No authentication has been selected to compare VRRP
packets received by a virtual router.
• Simple Text Password - A Simple password has been selected to compare
VRRP packets received by a virtual router, for authentication.
• IP Authentication Header - An MD5 message digest algorithm has been
selected to compare VRRP packets received by a virtual router, for
authentication.
VRID
Displays the virtual router ID set by the user. This will uniquely identify the VRRP
Interface on the network.
Virtual IP Address
The IP address of the Virtual router configured on the Switch.
Virtual MAC Address
The MAC address of the device that holds the Virtual router.
Virtual Router State
Displays the current status of the virtual router. Possible states include Initialize,
Master and Backup.