User manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
181
OSPF Interface Settings
To set up OSPF interfaces, click Configuration > Layer 3 IP Networking > OSPF > OSPF Interface Settings to view
OSPF settings for existing IP interfaces. If there are no IP interfaces configured (besides the default System interface), only
the System interface settings will appear listed. To change settings for in IP interface, click on the hyperlinked name of the
interface to see the configuration menu for that interface.
Figure 6- 143. OSPF Interface Settings window
Figure 6- 144. OSPF Interface Settings - Edit window
Configure each IP interface individually using the OSPF Interface Settings - Edit menu. Click the Apply button when the
user has entered the settings. The new configuration appears listed in the OSPF Interface Settings table. To return to the
OSPF Interface Settings table, click the Show All OSPF Interface Entries
link.
OSPF interface settings are described below. Some OSPF interface settings require previously configured OSPF settings.
Read the descriptions below for details.