User manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
161
RX Mode
Toggle among Disabled, V1 Only, V2 Only, and V1 or V2. This entry specifies which
version of the RIP protocol will be used to interpret received RIP packets. Disabled
prevents the reception of RIP packets.
Authentication
Toggle between Disabled and Enabled to specify that routers on the network should
us the Password above to authenticate router table exchanges.
Password
A password to be used to authenticate communication between routers on the
network.
State
Toggle between Disabled and Enabled to disable or enable this RIP interface on the
switch.
Interface Metric
A read-only field that denotes the Metric value of the current IP Interface setting.
Click Apply to implement changes made.