User manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
131
Class
Entering a value between 0 and 255 will instruct the Switch to examine the class field
of the IPv6 header. This class field is a part of the packet header that is similar to the
Type of Service (ToS) or Precedence bits field of IPv4.
Flowlabel
Configuring this field, in hex form, will instruct the Switch to examine the flow label
field of the IPv6 header. This flow label field is used by a source to label sequences of
packets such as non-default quality of service or real time service packets.
Source IPv6 Address
The user may specify an IP address mask for the source IPv6 address by entering the
IP address mask, in hex form.
Destination IPv6
Address
The user may specify an IP address mask for the destination IPv6 address by and
entering the IP address mask, in hex form.
To view the settings of a previously correctly configured rule, click in the CPU Access Rule Table to view the
following screen:
Figure 6- 92. CPU Access Rule Display window (IPv6)