User manual

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
127
Source IP
Source IP Address - Enter an IP Address for the source IP address.
Destination IP
Destination IP Address - Enter an IP Address mask for the destination IP address.
DSCP (0-63)
Select this option to instruct the Switch to replace the DSCP value (in a packet that
meets the selected criteria) with the value entered in the adjacent field.
Protocol
This field allows the user to modify the protocol used to configure the Access Rule
Table; depending on which protocol the user has chosen in the Access Profile Table.
To view the settings of a previously correctly configured rule, click in the CPU Access Rule Table to view the
following screen:
Figure 6- 86. CPU Access Rule Display (IP)
The following window is the CPU Access Rule Table for Packet Content.
Figure 6- 87. CPU Access Rule Table (Packet Content).
To remove a previously created rule, select it and click the
button. To add a new Access Rule, click the Add button: