Product specifications

19/29
SNMP Trap
Supports following Trap events
- New MAC Notification
- Power and fan errors
- Cold / Hot start-up
- Link state change
- STP state change: support port STP state change. (ex.
Forwarding->blocking)
- SNMP authentication failure
- Management Access Login failure: no id or password error, no
privilege for access, no authentication server, or server
timeout.
-Management access login fail.
-802.1x access login fail
-WAC access login fail
- MAC access login fail
- MAC access login fail
- Port Security violation
- Fan status
- Firmware upgrade via SNMP is finished
- IP-MAC-Port Binding access violation
- Loopback occurring and recovery
- Send a trap after save
- DHCP Server Screening
- Gratuitous ARP
- LACP Trap
FCS
System Log
1. Support IPv4/v6 log server
2. Support WAC/MAC log information
3. Support the log for storm control block mode
RFC3164 FCS
Trap/ Alarm/ Log
Severity Control
Be able to divide the events into 8 severity levels and trigger
corresponding logging activities based on the defined severity
levels.
FCS
RMON v1 Support 4 groups (statistics, history, alarm and event) RFC2819 FCS
RMON v2 Support Probeconfig group FCS
sFlow
1. Support Port-based flow sampler and counter poller
2. Support max 256 leading bytes for flow sampling
3. Support sFlow version 5
4. Support IPv4/IPv6 server
RFC3176 FCS
BootP/DHCP
client Support IPv4 / IPv6
RFC951,
RFC1542,
2131
FCS
DHCP
Auto-configuration
FCS