Product specifications

15/29
ACL Policy
ACL policy supports following packet contents:
- 802.1p priority
- VLAN
- MAC address
- Ether type
- IP address
- DSCP
- Protocol type
- TCP/UDP port number
- IPv6 Traffic Class
- IPv6 flow label
- User defined packet content
FCS
Time Based ACL Support up to 64 time range profiles FCS
ACL Statistics FCS
CPU interface
filtering
Max 5 profiles, 100 rules FCS
Security
SSH v2
1. Support SSH v2
2. Support IPv4/v6 access
3. Support user selectable port number other than default port
22
FCS
SSL
1. Support v1/v2/v3
2. Support IPv4/v6 access
FCS
Port Security 1. Support 64 MACs per port FCS
Broadcast/Multica
st/Unicast Storm
Control
1. Allow specifying the threshold in terms of pkt/s for per port. Min
granularity: 1pkt/s
2. Be able to set up a storm threshold. When broadcast / multicast
/unknown unicast traffic hit the defined threshold, the switch will
start blocking or discarding packets which would otherwise
'flood' the network. The blocked port will be activated again
only when the broadcast/ multicast/ unknown unicast traffic falls
below the defined threshold.
3. Allows the configuration of recovery timer for shutdown ports
FCS
Traffic
Segmentation
FCS
D-Link Safeguard
Engine
1. System will send out trap and log when CPU utilization hit the
definable threshold
2. Protect CPU from Broadcast / Multicast / Unicast flooding
3. Protect CPU from protocol control packet attacks
FCS
BPDU Attack
Protection
Switch has 3 options when a port receives BPDU packet:
Drop BPDU packets, drop all packets, or shutdown port
FCS
ARP Spoofing
Prevention
FCS
IP-MAC-Port
Binding
1. Support D-Link IMPB v.3.9
2. Support 500 address binding entries per device
3. ARP Inspection
4. IP Inspection (IPv4/v6)
5. Support IPv4/v6 DHCP Snooping
6. Support IPv6 ND Snooping
7. Support IMPB debug command in CLI mode
FCS
NetBIOS/NetBEUI
filtering
Support IP & non-IP (802.3) modes (Default: IP mode) FCS
DHCP Server
Screening
Support log/trap triggering when receiving any illegal DHCP
server packet
FCS