Product specifications

12/29
MLD snooping
1. 1K MLD snooping groups;
2. Support 64 static multicast addresses;
3. Can configure a port as a static router port, or can forbid a port
to be learnt as a router port.
4. Per VLAN MLD Snooping
5. Support L2 multicast filtering modes as below
- Forward all groups
- Forward all unregistered groups
- Filter all unregistered groups
6. Support MLD v2 snooping
7. Support host-based MLD fast leave
8. Support MLD messages rate limit per port / per VLAN
9. Support snooping counter
10. Support snooping switches(RFC 4541)
FCS
L3 Features
IP Interface
1. Support 256 IP interfaces
2. Support max 256 IP interfaces per VLAN
3. Support IPv4 address 0.0.0.0 to prevent the switch from
occupying an IP address in the network.
FCS
Loopback
Interface
Support 8 IPv4/v6 interfaces FCS
Null Interface FCS
ARP
1. Max 8 ARP entries
2. Support 256 static ARP
3. Support Gratuitous ARP
FCS
ARP Proxy
1. Support ARP Proxy between different subnets
2. Support Local ARP Proxy in the same subnet
RFC1072 FCS
VRRP
1. Owner / non-owner ping response
2. Support text authentication
RFC2338 FCS
IPv6 Ready Phase
2
IPv6 Ready Logo Phase 2 compliant FCS
L3 Routing
Routing Table Size
1. Total 12K routing entries shared by IPv4/6
- Max 12K entries for IPv4 dynamic route
- Max 6K entries for IPv6 dynamic route
FCS
L3 Forwarding
Table Size
1. Total 8K L3 H/W forwarding entries shared by IPv4/v6
- Max 8K IPv4 entries
- Max 4K IPv6 entries
FCS
Static Route
1. Total 256 entries shared by IPv4/v6
- Max 256 IPv4 entries
- Max 128 IPv6 entries
2. Secondary static route
3. Equal Cost / Weighted Cost multi-path route
4 Support route redistribution
FCS
Default Route
1. Support IPv4/v6 secondary default route
2. Support Equal Cost / Weighted Cost multi-path route
3. Support route redistribution
FCS
RIP Support RIP v1/v2 FCS